View My Stats

Silicate Polish Patent

  • Home |
  • Silicate Polish Patent

Silicate Polish Patent Owned By Marmo Solutions

Silicate Polish, the product used to protect and preserve looks of Granites, Marbles, Tiles and other such decorative stones is patented by Ministry of Commerce and Industry. The Details of the patent follow as:-

Record No. : 1 Application Number : 2671898
Word Mark SILICATE POLISH (LOGO)
Class 3
Appl. Date 04/02/2014
Proprietor MARMO SOLUTIONS PRIVATE LIMITED
Journal No. 1723-0
Journal Date 14/12/2015
Status Registered
Used Since 20/05/2013
Valid Upto 04/02/2024
Goods & Services Description SILICATE POLISH (TO PROTECT & PRSERVE LOOKS OF GRANITES, MARBLES, TILES ETC.) INCLUDED IN CLASS 3.

How to do Marmo Solutions Silicate Polish?

Silicate Polish is an exclusive process patented by Marmo Solutions in Class 3 in application no. 2671898 to get your marble much cleaner and shiner. It is a step wise process to clean marble and is being done for different processes. The process of doing the Silicate Polish is carried in two successive steps for the natural marble shine:-

  • Product Selection for the Marble Surface
  • Polishing of the selected Surface

Following is the List of Different Marble & Surfaces to be treated under Silicate Process

  • Product Selection for Beige or Coloured Marble on Masonry Surface
  • Product Selection for White and Black Marble on Masonry Surface

Silicate Polish Process for Beige or Coloured Marble on Masonry Surface

PRODUCT SELECTION

  • Choose one part non yellowing MARMOGUARD for pores filling
  • Two Part hardly yellowing MARMOPOXY -L
  • One Part non Yellowing micro pores filler MARMOGUARD PLUS
  • One part rubbing or polishing cream/powder MARMOSHINE-L / MARMOSHINE-P
  • One part, high performance MARMOBARRIER

POLISHING PROCESS

  • Grind the surface with 1 No with ordinary Indian Machine then with 60 No and 100 No Flexi diamond Grit/Pad by Diamond machine.
  • Let the surface dry 100%
  • Clean the surface properly then apply MARMOPOXY -L to the whole surface with the fine toothed spreader after approx 12 to 24 hours the hardened MARMOPOXY-L can be further processed starting from FLAXIPAD 200 No DIAMOND Machine 2.5hp (175 rpm) or and single dics machine cover the surface with clean water make passes using side to side motion till surface get smoothed.
  • Wash the surface with clean water let the surface dry.
  • Clean the surface properly then apply MARMOGUARD to the whole surface with fine spreader repeat the process till pores get fill 100% after approximately 12 hour the hardened pores filler can be further processed starting from FLAXIPAD 400 No to 1500 No with Diamond Machine 2.5hp(175rpm) or any single dics machine over the surface with clean water make passes using side to motion till surface get smoothed.
  • Apply 2 Coat MARMOGUARDPLUS on the whole surface with fine fiber mop or fine towel after approx. 12 hour the hardened MARMOGUARD PLUS can be further processed starting from FLAXIPAD 1500 No then FLAXIPAD 3000 No to DIAMOND MACHINE 2.5 hp (175rpm) or and single side machine and cover the surface with clean water with FlAXIPAD 3000 No. make passes using side to side motion till surface get smoothed.
  • Clean the surface properly then spread MARMOSHINE L or MARMOSHINE P sprinkle water to the whole surface scrub the surface with red 3m 5100 pad with Diamond Machine 2.5hp (175rpm) or any other single dics machine make passes using side to side motion till surface get dry.
  • Clean the surface properly than apply MARMOBARRIER using paint roller for the uniform application. (If the desired effect is not achieved or if the impregnation has been applied unevenly. If it is possible to apply the impregnation once again water repellent effect develops after few minutes, full protection after 8 to 9 hours.)

Silicate Polish Process for Beige or Coloured Marble on Masonry Surface

PRODUCT SELECTION

  • One Part non-yellowing MARMOGUARD for pores filling.
  • Two part non yellowing MARMOMASTIC CLEAR liquid.
  • One part non yellowing micro pores filler MARMOGUARD PLUS.
  • One part rubbing or polishing contain MARMOSHINE L/MARMOSHINE P.
  • One part high performance MARMOBARRIER.

POLISHING PROCESS

  • Grind the surface with 1 No with ordinary Indian Machine then with 60 No and 100 No Flexi diamond Grit/Pad by Diamond machine.
  • Let the surface dry 100%.
  • Clean the surface properly then apply MARMOMASTIC Clear to the whole surface with the fine toothed spreader after approximately 12 to 24 hours the hardened MARMOMASTIC Clear can be further processed starting from FLAXIPAD 200 No DIAMOND Machine 2.5hp (175 rpm) or and single dics machine cover the surface with clean water make passes using side to side motion till surface get smoothed.
  • Wash the surface with clean water let the surface Dry.
  • Clean the surface properly then apply MARMOGUARD to the whole surface with fine spreader repeat the process till pores get fill 100% After approximately 12 hours, the hardened pores filler can be further processed starting from FLAXIPAD 400 No to 1500 No with Diamond Machine 2.5hp(175rpm) or any single dics machine over the surface with clean water make passes using side to motion till surface get smoothed.
  • Apply 2 Coat MARMOGUARDPLUS on the whole surface with fine fiber mop or fine towelafter approx. 12 hour the hardened MARMOGUARD PLUS can be further processed starting from FLAXIPAD 1500 No then FLAXIPAD 3000 No to DIAMOND MACHINE 2.5 hp (175rpm) or and single side machine and cover the surface with clean water with FlAXIPAD 3000 No. make passes using side to side motion till surface get smoothed.
  • Clean the surface properly then spread MARMOMASTIC Clear or MARMOSHINE P sprinkle water to the whole surface scrub the surface with red 3m 5100 pad with Diamond Machine 2.5hp (175rpm) or any other single dics machine make passes using side to side motion till surface get dry.
  • Clean the surface properly than apply MARMOBARRIER using paint roller for the uniform application. (If the desired effect is not achieved or if the impregnation has been applied unevenly. If it is possible to apply the impregnation once again water repellent effect develops after few minutes, full protection after 8 to 9 hours.)